Welcome to "Colloidal Silver How-To"
The Home of the $10 Colloidal Silver Generator

Below, find some of our most-asked questions, notes about shipping/handling, contact info, etc.

Fall & Winter Colloidal Silver tip!

Here's a tip for Fall and Winter colloidal silver use...

I use a nasal mister through the cold weather months, filled with my own colloidal silver.  I discovered that whenever my sinuses are stuffy, the possibility of a cold or flu is nearby.  But you say, "My sinuses are always stuffy!"  I know what you mean!  I don't become ill through the winter months often... especially now that I make my own colloidal silver... but I discovered that whenever I did become ill, it seemed that the very first indicator was stuffy sinus.  So, I began to use a nasal mister once a day, sometimes twice a day, and here's what I noticed:

1.  No more sinus headaches.  When I feel sinus pressure, I use the mister.  It stops sinus headaches in their tracks.
2.  No more colds.  I've not had a single cold since using the mister.
3.  Taken before traveling by plane, no more getting sick after arriving at my destination, or returning home.
4.  No more snoring complaints from my spouse!  I'm not kidding!  I never saw that one coming....  I'm not saying that using a nasal mister with colloidal silver before bed will cure snoring.  But apparently it did for me!
5.  I use far less colloidal silver.  When using a mister, I have discovered that there is no need to take colloidal silver orally.  Therefore, I only make enough colloidal silver to fill my mister bottle about once a month, and to have enough on hand in case someone in the family wishes to take some orally to stop inflammation or infection.

Yes, we sell a nasal mister on this site!  You can view the mister by going to our Parts & Accessories Page. I wouldn't leave home without one.  And what's great is that it holds less than 3 oz. so you can carry it with you when traveling by plane, and use it whenever you feel the need throughout your flights and your time away from home.

We have a limited quantity of 20ml misters available for only $5.95.  They are amber colored glass, and have held up for me for over a year now and counting.  I urge you to keep a mister close by, filled with your own colloidal silver!

Here's to your health!

Do you ship to the European Union?

Yes.  We ship to the European Union.
We get this question a LOT, especially since the European Union has apparently banned the retail sale of colloidal silver (I PRAY the US never moves to a place of government regulation at this level!!!)  If you live in the EU and are interested in purchasing from us, please write to us with the items you are interested in ordering, along with your shipping address, and we will be able to determine in advance if we will require additional funds to offset our shipping charges.

Production questions

What is "agitating the water"?

          We discovered, along with some other Colloidal Silver Generator producers that "agitating the water" is invaluable to the Colloidal Silver production process.  In fact, learning of the value of agitating the water was the final chapter in developing a very stable, high quality Colloidal Silver product. 
          I had been reading quite a bit about "agitating the water" to reduce macro-particles of silver solution, to better stabilize the final product after production, and most importantly to generate a higher colloidal content and less ionic silver content (which is far more desirable).  In viewing photos of agitated water, it became very apparent to me that all they were doing was pumping air in the water during the production process.  That led to purchasing a small aquarium pump to agitate the water while the generator was working.  I had no idea how radically the end product would so positively change for the better!  Whatever you do during colloidal silver production of your own, buy a pump (we offer one that I use every time I make Colloidal Silver).  Agitate the water.  It makes a huge difference in the quality of your end product. 

Why do you use only 9-volt and 12-volt systems?

          You'll also notice that our generators only use a single 9-volt battery, or a 12-volt transformer.  There's a reason for this.  When I first began producing my own Colloidal Silver, I had been talking with many of my own friends who had been producing their own colloidal silver for years.  Their view was that the lower the voltage, the more satisfactory the results.  I have tried the battery-operated generators sending as much as 27 volts through the silver.  But I didn't care for the result.  The advice I received from the friends I trust, who have been supplying their own families with colloidal silver since the early 1990's, is that 9 volts to 12 volts is plenty of voltage to generate a more than satisfactory product.

How much colloidal silver do I make at a time?

For personal use, I usually make one pint jar at a time.  This quantity will normally last me up to 2 weeks if I am taking 1 to 2 Tbsp. per day as a mineral supplement.  If I am requiring more, or if I am making enough to give away to family or friends, I will move to the quart jar.

Which charger do I use (battery-powered or 12-volt plug-in charger)?

I use the 12-volt DC electric charger (see farther down page) most often.  I use the battery-powered device when an electrical plug is either not available, or I don't want to string an electrical extension cord across a room.  The battery-operated devices work well when traveling by car.  When traveling by plane, I take the 12-volt electric charger in my suitcase and store it with my other chargers (phone, camera, etc.)  In terms of simplicity, I use the 12-volt charger primarily.

The value of the battery-powered generator is if you have lost electricity as the result of a power outage, if you live off the grid or on a boat or in a motor home, or if you are on the road a lot, you can take this one with you anywhere. 

How long does it take me to make colloidal silver?

I use the pint jar most often.  I use the 12-volt generator mostly, along with two 6" silver rods (also see below).  Because the pint jar is more shallow than the quart jar, I curl the silver rods (they are .9999 pure, so they are soft and pliable) into a J-Shape.  I check the water every 30 minutes with a pen laser, and find most often that the silver is ready in 1 to 2 hours.  If I am using a quart jar, I usually have 8ppm colloidal silver in 4 to 5 hours, using an air pump agitator, and running 12V DC through the water.

So what is all the hype about "agitating the water" during Colloidal Silver production?

Actually, it's not hype.  It's true.  And it's amazing.  Your final product will be greatly enhanced through simply agitating the water during Colloidal Silver production.  I had read about it a lot online on other Colloidal Silver generator retail sites.  One site will agitate the water for you, and provide low-voltage Colloidal Silver generation for you for only $400!  You can do it a LOT cheaper here.  Just use a simple aquarium air pump.  Go with a smaller one because if it pumps too much air into the water, you'll get a lot of splashing.  High air volume isn't necessary because all you're doing is keeping the water agitated.

Here's what I found with my own use.  I had been reading quite a bit about "agitating the water" to reduce macro-particles of silver solution, to better stabilize the final product after production, and most importantly to generate a higher colloidal content, and less ionic silver content (which is far more desirable).  I had no idea how radically the end product would so positively change for the better!  Whatever you do during colloidal silver production of your own, buy a pump.  Agitate the water.  It makes a huge difference in the quality of your end product.  Yes, we offer pumps on this site, but this too is something you can find in lots of retail places.

How do I know when the colloidal silver is ready?

The more you make colloidal silver, the more you will get a "feel" for the level of ppm (parts per million) that you like best.  For internal or topical use, you'll discover which solutions are the right intensity for you.

     Given that most people do not own a TDS meter ("Total Dissolved Solids"), we now make them available for purchase.  At home, I also use a pen laser light shining through the jar during colloidal silver production (pen lasers are available as well).  It is interesting to shine the light through the jar through the distilled water before beginning to make colloidal silver.  You will see no beam.  The water is pure.  Within 20 or 30 minutes, shine the light through the water again.  You will begin to see particles reflected in the beginning of a beam that you can see.  You can also begin to see the "smoky" effect coming off one of the silver rods (if you are not agitating the water).  These are the silver ions being generated.  This smokiness is dissipating silver into the distilled water.  And that is what we want.  When after roughly an hour (for pint jars) and 1 to 2 hours for quart jars, when you see a solid beam of laser light through the width of the water in the jar, your silver is ready! 

Additional Notes

Contact us:
My name is Robb McDaniel.
I may be contacted through our business address or via email:
Memory Maker Greeting Card Co.
873 County Road 426
Berryville, Arkansas 72616
robb@healthyplanetonline.com

Shipping Charges:

Shipping charges are computed as follows:
$5.25 on orders up to $39.99
$7.95 on orders $40.00 to $60.00
$9.95 on orders $60.01 and up

Please contact us regarding shipping orders and pricing outside of the United States.

Mail Order:
Mail orders are welcome.  We accept checks or money orders for the total amount, including shipping.  Be sure that you add shipping charges to each order (regardless of size).  Orders without shipping costs included only delay the receipt of your order (while we wait for additional funds from you).  Arkansas residents, please add 8% sales tax.

Orders paid by money order will receive immediate attention.  Personal/ business checks will require a 10-day processing period.

To print a mail order, we suggest that you go through the shopping cart process online through PayPal, type in your zip code on your shopping card page to include shipping charges, and print this page, prior to continuing to an online payment page.  This printed page will be your mail order form.  Make your check payable to:  Robert McDaniel

Enclose the appropriate amount, and mail to:
Memory Maker Greeting Card Co.
873 County Road 426
Berryville, Arkansas  72616

PayPal Account Name:  Memory Maker Greeting Cards
As you have probably already determined, "Colloidal Silver How-To" is not our primary business.  However, "Colloidal Silver How-To" is very much more than a simple hobby.  It's very much a personal mission because of our passion concerning the benefits of colloidal silver.

Yet, you will notice that with your online orders, the PayPal account name will be listed as:
Memory Make Greeting Cards

Warranty and Returns:
We do offer a 30-day money back guarantee, which covers a warranty against product workmanship and performance.  Simply return the product you purchased, with your name and please provide the reason for the return.  Ship the product to the address listed above.  You will be refunded the product price, less shipping charges.
 

Disclaimer:
"Colloidal Silver How-To" makes no claims whatsoever on this website as to specific health benefits and/or cures through use of a colloidal silver generator, nor through the consumption of colloidal silver.  Nothing in this website nor by Healthy Planet Online, LLC, nor its affiliated websites, including Memory Maker Greeting Cards, is to be even remotely construed as to be asserting any claims whatsoever with regard to health and the use of a colloidal silver generator to produce colloidal silver.
 

© Healthy Planet Online, LLC